Bentonite Trenching and Injection

Bentonite Trenching

To provide a waterproof barrier, a cut-off trench enriched with bentonite is installed in the dam.

With the water level high, an excavator is used to dig a trench through the core of the embankment, in the area of the leaks. The spoil is set aside and the clay content enriched by the addition of sodium bentonite powder. The spoil is then returned to the trench and as the bentonite is wetted it swells to provide a barrier to water movement.

Bentonite Injection

In certain circumstances, particularly around structures, in large embankments or where surface disruption must be avoided, a slurry of sodium bentonite or bentonite and cement are injected below the surface using pressure grouting equipment. The bentonite fills the voids created by water piping through the soil so sealing the leaks. This technique causes less disruption than trenching but it is difficult to ensure that every leak is filled.

Leaked dam waterproofed using Bentonite Trenching method - Kingcombe Aquacare leak through embankment services
Leaked dam waterproofed using Bentonite Trenching method
Injecting bentonite into a leaking dam - Kingcombe Aquacare leak through embankment services
Injecting bentonite into a leaking dam